Catégories
hardware

Top 10 Tips On How To Use A Laptop Properly And Safely

Make sure your laptop is always with you. Do not check laptops in with your luggage while traveling. Never leave your laptop in your car in plain sight or any valuable objects for that matter. There has been a recent increase of car burglaries stemming from people leaving valuables in plain sight. Lock all valuables in the trunk.

CD-ROM’s for school laptop labs are optional if not totally unnecessary. I say this because they are usually the first thing to break. Second your computer techs will install all necessary software via ghosting or over the network. Third not having CD-RW’s or DVD-ROMs remove the temptation of using the laptops for non-educational use.

One of the first things you need to consider in a laptop is the CPU. The latest laptop CPUs include Intel’s Core Duo and Core 2 Duo processors which outperform older single-core Intel processors (e.g. Pentium M). Other laptops use the AMD Athlon Turion 64 X2 dual-core processor – which is also a good performer. In general, however, if you’re looking for a laptop, I’d advise you to look for one with an Intel Core Duo processor. You can also read this guide to find out more.

Of course that nothing saves your laptop batter from liquid spill than the fact that you keep your laptop…away from liquids. Keeping the coffee cup close to your computer is not a good thing…even if as I write these words down I keep the coffee cup right between me and the keyboard…bad habits die hard, right? OK,I moved it…

Once inside, simply remove the existing memory module by pulling the latches at either ends in an outwards direction (if you need to free up space) in which case the existing module will pop up. Simply pull it out once loose. If you don’t need to free up space and simply want to insert the new module, align the latch on the slot and module correctly and then insert the module at about an angle of 45 degrees. Once the gold plated pins are hidden (inserted) in the memory slot, press down until the DDR laptop memory module clicks into place!

Let the screen open and never reassemble the laptop until everything is completely dried. For this, leave the laptop on an air flow for at least 1 full day.

First – it was not protected very well. I had to make my own laptop bag cushions by putting my extra clothes around the naprawa laptop?w because I didn’t want my water bottle and other items to scratch it – or worse yet, leak on it. This made it a little hard to take the laptop in and out of the bag when I wanted to use it on the plane. At that point, I thought maybe a laptop sleeve would come in handy.

Apparently a lot of people were complaining about having to carry a laptop in a traditional case and were asking to have it replaced with a backpack. It seemed a backpack was much more comfortable so I decided to give it a try.